Baton Alabaster Wall Sconce
W4.7″ × H25.6″ / Brass
$375.00 USD
Skip to product information
Baton Alabaster Wall Sconce
$375.00 USD
Shipping calculated at checkout.
SMALOUIS · Baton
Quiet lines. A sculptural note on the wall.
The Baton Alabaster Wall Sconce is defined by a clean vertical gesture: a straight metal rod passes through an elongated oval backplate, rises into a tapered natural alabaster cone, and finishes in a slender point below. Its architectural silhouette is deliberately restrained, letting the stone and proportion carry the design.
Choose Brushed Brass, Brushed Nickel, or Matte Black hardware for a finish that complements the room, from a softly lit bedside to a considered hallway or vanity wall.
Design details
01 / MATERIAL
Tapered alabaster cone
Natural alabaster adds soft stone character and a gently diffused presence at the top of the linear silhouette.
02 / STRUCTURE
Graphic vertical profile
A single rod moves through the oval backplate, held by two horizontal bracket bars and finished with a fine lower point.
03 / FINISH
Three considered tones
Brushed Brass, Brushed Nickel, and Matte Black give the same quiet form three distinct material expressions.
Finish options
Brushed Brass
Brushed Nickel
Matte Black
The selected finish applies to the oval backplate, rod, bracket bars, and cone shade cap. The alabaster shade remains natural stone.
Dimensions
| Overall size | W12 × H65 cm / W4.7 × H25.6 in |
|---|---|
| Wall projection | 17 cm / 6.7 in |
| Light position | One tapered alabaster cone shade at the top of the rod |
| Installation | Wall-mounted, hardwired |
Product specifications
| Product | Baton Alabaster Wall Sconce |
|---|---|
| Material | Natural alabaster cone shade with metal hardware |
| Hardware finishes | Brushed Brass, Brushed Nickel, or Matte Black |
| Overall dimensions | W12 × H65 cm / W4.7 × H25.6 in |
| Wall projection | 17 cm / 6.7 in |
| Socket | E12 or E14 candelabra base, depending on region |
| Bulb | Not included unless confirmed for the selected version |
| Mounting | Wall-mounted, hardwired |
| Use | Indoor, dry locations only |
| Suggested placement | Hallway, bedside, bathroom vanity, or entryway |
Before ordering, contact SMALOUIS at support@smalouis.com to confirm the regional socket version, operating voltage, bulb requirements, and whether the selected configuration includes a bulb. The cone shade diameter is not listed separately; confirm clearance if required for your installation.
Installation and care
- Have a qualified electrician install the sconce in a secure wall junction box and follow local electrical requirements.
- Confirm the 17 cm wall projection and the full W12 × H65 cm profile before selecting the installation position.
- Handle the alabaster cone carefully during unpacking and installation. Natural stone can chip or crack under impact.
- Switch off power before cleaning or servicing. Dust the alabaster gently with a soft, dry cloth.
- Do not use water, solvents, abrasive cleaners, or abrasive cloths on the stone or metal hardware.
- Use an appropriate E12 or E14 bulb for your region and follow the bulb's wattage and voltage requirements.
- Indoor, dry-location use only. Keep the sconce away from direct water and excessive humidity.
Frequently asked questions
What is the Baton shade made from?
The shade is natural alabaster shaped into a tapered cone. Its tone and veining will have the natural variation expected from stone.
What finishes are available?
Choose Brushed Brass, Brushed Nickel, or Matte Black for the backplate, rod, brackets, and cone cap. The alabaster remains natural stone.
Which bulb does it use?
The socket is an E12 or E14 candelabra base depending on region. Bulb inclusion and the exact electrical specification should be confirmed with SMALOUIS before ordering.
How large is the wall sconce?
The listed overall size is W12 × H65 cm / W4.7 × H25.6 in, with a 17 cm / 6.7 in projection from the wall.
Can it be used in a bathroom?
It is intended for indoor, dry locations. For a bathroom vanity, install only where the location remains dry and confirm local electrical requirements before ordering.
How should I clean the alabaster shade?
Switch off power and dust gently with a soft, dry cloth. Avoid water, solvents, and abrasive products, which may damage natural stone.